User Inactivity controller

User Inactivity controller enables to set content changes or return to the Start component after a certain time frame.

To setup project with controller:

1. Create project in Displayforce Designer.
2. Open “Controller” section on the upper menu.
3. Select “Add controller” section in the drop-down list, then “System” section and “User inactivity controller”.
4. Click “Create” in the opened window.     
     
5. Place the controller on the program’s Desktop.
6. Add the Interface Editor components (in any quantity) by clicking the menu button in the right upper corner.
   
7. Place the components on the program’s Desktop.
8. To define one of the components as a Start, click the appropriate icon (if there is no such icon, click right mouse button on the component and select “Start component”).
   
9. Open one of the Interface editor components.
10. Open “Control” section on the upper menu, click Event icon.
    
11. Select “User Inactivity controller” to link the component.
    
12. Click OK in the left corner.
13. The same settings are needed for rest of the components.
14. Open Controller after linking all the components to it.
15. In “User inactivity timeout” section, set the time that will be as a trigger for switching the controller to the component.
    
16. Click Link icon.
17. Select the component to link as described above.
18. Click OK.
19. Return to Start component has been set.